2024 Generac Mobile Diesel Generator MLG8K
- Year 2024
 - Make Generac Mobile
 - Model Diesel Generator
 
2024 Generac Mobile Diesel Generator MLG8K
Affordable, Highly Mobile PowerThe MLG8K diesel generator provides just the right combination of output, portability, ruggedness, efficiency and affordability for on-the-go, single smaller-load, single phase power needs. Generac Mobile recognizes environmental responsibility and continues to meet emission regulations with the addition of our Interim & Tier 4 Generator line. The MLG8K generator is powered by a Kubota diesel engine. Proven power you can trust, while maximizing fuel efficiency and high performance
Features may include:TOUGH AND DURABLE
- Full tubular steel frame, lockable enclosure
 
- Durable, fade resistant, baked on white powder coat finish
 
- Stainless steel hinges, exterior hardware and pad lockable door latches
 
PROVEN RELIABILITY
- Key switch to preheat (glow plug), start & stop
 
- Automatic low oil level / high temp shutdown alerts
 
- 40A main breaker
 
- 2 year - 2,000 hour warranty
 
- Marathon voltage regulation within +/- 1%
 
EASY TO USE
- Self-priming 3 cylinder Kubota engine
 
- External convenience outlets with individual breakers
 
- External emergency stop switch
 
Engine
							Engine Manufacturer
							 Kubota D1105-E3BG
						
						
							Engine Type
							In-Line
						
						
							Emissions
							Tier IV Final
						
						
							Cylinder Liners
							6
						
						
							Displacement
							68.5 in3 (1.2 L)
						
						
							Bore
							3.27 in (83 mm) 
						
						
							Stroke
							3.64 in (92.4 mm)
						
						
							Compression Ratio
							 17.6:1
						
						
							Cooling
							 Naturally Aspirated
						
						Fuel System
							Fuel Type
							Ultra Low Sulfur Diesel 
						
						
							Fuel Injection
							Direct Injection
						
						Electric
							Electrical
							System Voltage – VDC: 12 V | Ground Polarity Negative: (-) | Battery Charger Alternator: 60 A
						
						Operational
							Operating Conditions
							Frequency Regulation (Steady State):   <5%
						
						
							Operating Speed
							Fan:  1,800 RPm
						
						Hydraulics
							Pump Type
							water: Belt Driven | Cooling: Water Jacket | Fuel:  Gear | Oil type:  Trochoid
						
						
							Oil Filter
							Spin-On Cartridge
						
						Dimensions
							Dimensions
							Fuel Supply Line Diameter: 0.313 in (7.9 mm) | Fuel Return Line Diameter: 0.313 in (7.9 mm)
						
						
							Fan Diameter
							12.99 in (330 mm)
						
						Capacities
							Cooling System
							capacity:  4.5 qt (4.2 l)
						
						
							Features
							Crankcase: 3.5 qt (3.3 l)
						
						Features
							Features
							Fan Type: Pusher